| Frequency Range | B3 ：UL：1710MHz-1785MHz DL：1805MHz-1880MHz B1 ：UL：1920MHz-1980MHz DL：2110MHz-2170MHz |
| Continuous Instantaneous Bandwidth | B3:75MHz B1:60MHz |
| Max Outputpower | UL:20dBm DL:2*33dBm |
| ALC | ≧25dB |
| Max Gain & Tolerance | UL:80±2dB DL:85±2dB |
| Gain Adjustment Range | ≥30dB |
| Step Size | ≤2dB |
| EVM | Uplink QPSK：≤12.5% |
| Uplink 16QAM：≤8% |
| Downlink 64QAM：≤8% |
| Downlink 256QAM: ≤5% |
| Frequency Tolerance | ±0.1ppm |
| Max Allowable Input Level | ≥-10dBm |
| In-band Ripple | ≤2.5 |
| VSWR | ≤10dB |
| Downlink Out-of-Band Suppression | 3MHz<f_offset<5MH：≥20dB |
| 5MHz≤f_offset：≥25dB |
| Noise figure | 1 MU + 1 RU: The max uplink gain ≤ 9 dB |
| Delay | ≤ 4.5 us |
| Power Supply |
| Power Supply | AU:AC 220V RU: DC 48V (Remote Power Supply) |
| Power Consumption | AU (Local): 25W (self-powered) AU (Remote Supply): ~500W RU: 90W |
| Heat Dissipation | Passion Convection |
| Environmental |
| Operating Temperature | AU: -10°C to +55°C RU: -10°C to +55°C |
| Relative Humidity | AU: ≤85% RU: ≤85% |
| Protection Rating | AU: IP30 RU: IP30 |
| Mechanical |
| Dimensions (H × W × D) | AU: 440mm × 215mm × 44mm (excluding mounting brackets) RU: 364mm × 210mm × 111mm ( excluding mounting brackets) |
| Weight | AU: ~10.2 kg RU: ~7 kg |
| Interface (AU) |
|
| Port Identification | Description |
| SIM | SIM card slot for Modem |
| OP1-OP4 | SC optical port, synchronized with RU |
| OMT | Local debugging port |
| POWER | Equipment power supply |
| DC OUT 1~4 | Remote power supply for RU |
| RF IN 1(B1) | SMA (50Ω) |
| RF IN 2(B3) | SMA (50Ω) |
| Indicator (AU) |
| Name | Description |
| PWR (Green) | Solid Green ：Power supply normal Off ：Power failure or anomaly |
| RUN (Green) | Green (1second,1 flash): No software loaded / incomplete startup Off: No power / hardware fault |
| ALM (RED) | Solid Red: General warning condition Off: No active alarms |
| MOD (Green) | Solid Green: Modem functioning normally Off: Modem fault detected |
| OP1-OP4(Green) | Solid Green: Received optical power exceeds the threshold value Off: Received optical power below threshold |
| Interface (RU) |
|
| Port Identification | Description |
| OP | Communication for AU |
| POWER | DC48V power supply connection |
| ANT1 | External antenna interface for B1 B3 combined |
| ANT2 | External antenna interface for B1 B3 combined |
| Indicator (RU) |
|
| Name | Description |
| RUN/ALM (Green) | Green (1second,1 flash): No software loaded / incomplete startup Off: No power / hardware fault |
| OP (Green) | Solid Green: Received optical power exceeds the threshold value Off: Received optical power below threshold |
Home >
+86 186 8871 1070
Detail
Detail
+86 186 8871 1070
